Product Information

MDATii

conventional

High precision

Specifications with rotary encoder

Method

(data) item	unit	MDATii232BS-09	MDATii303DS-ALECT-06	MDATii302S-ECT-03	MDATii800B-01
Table diameter	mm	Φ230	Φ280	Φ280	Φ800
Center height at 90 degrees	mm	210	300	300	500
Table surface height when level	mm	295	280	280	645
Table through-hole diameter	mm	50	75 Deep 160	75	130 Deep 32
TABLE T GROOVE WIDTH	mm	12	12	12	14
Motor used Rotary shaft		FANUC αis4/5000-B	FANUC αis8/4000-B	FANUC αis8/4000-B	FANUC αis22/4000-B
Motor used Inclined shaft		FANUC αis4/5000-B	FANUC αis12/4000-B	FANUC αis12/4000-B	FANUC αis22/4000-B
Reduction ratio Rotary shaft		1/120	1/90	1/90	1/360
Reduction ratio Inclined shaft		1/360	1/120	1/180	1/360
Maximum rotation speed Rotating shaft	min-¹	16.7	33.3	22.2	2
Maximum rotation speed Inclined shaft	min-¹	5.5	25	5.5	2
Motor rotation speed Rotation shaft	min-¹	2,000	3,000	2,000	720
Motor rotation speed Inclined shaft	min-¹	2,000	3,000	660	720
Minimum setting unit	times	0.001	0.001	0.001	0.0001
Indexing accuracy Rotary axis	second (60th min)	5	±7	±7	3
Indexing accuracy Inclined axis	second (60th min)	8	±10	±10	2
Reproducibility Rotary axis	second (60th min)	±2	±2	±2	6
Reproducibility Inclined axis	second (60th min)	±3	±3	±3	3
Clamping torque Rotary shaft	N・m	333.2	1,666	1,666	-.
Clamping torque Inclined shaft	N・m	1,628	2,156	2,156	-.
Clamping pressure	MPa	4.9	4.9	4.9	-.
Allowable cutting torque	N・m	735	735	735	735
Product weight	kg	320	440	620	3,190
Allowable load work mass	kg	80	265	265	300
Allowable Warkinersha	kg・m²	0.88	3.0	3.0	23.8