Product 

DDAT

Direct drive

High responsiveness High speed High accuracy 

Method

                                       
(data) item unit DDAT106-SSH-14DDAT306-1000-SSH-02 DDAT506-07 DDAT1006TD-01 DDAT206-ECT-05
Table diameter mm Φ100 Φ300 Φ500 Φ1000 Φ200
Inclined shaft center height mm 235 395 300 830 350
Height when the table surface is horizontal mm 235 420 340 830 315
Table through-hole diameter mm -. -. -. 80 -.
TABLE T GROOVE WIDTH mm -. -. 14indecent 7 18 -.
Motor used (FANUC*) Rotation axis Dis 60/ 600-B Dis 600/ 1500-B Dis 600/ 600-B Dis5000/500 (400V) Dis 80/ 400-B
Motor used (FANUC*) Inclined axis Dis 80/ 400-B Dis 600/ 600-B Dis 1000/ 1000-B Dis1000/200 x 2 Dis 180/ 800-B
Maximum rotation speed Rotating shaft min-¹ 200 1,000 125500 150
Maximum rotation speed Inclined shaft min-¹ 30 65 25 20 25
Minimum setting unit Rotation axis times 0.001 0.001 0.001 0.001 0.001
Minimum setting unit Inclination axis times 0.001 0.001 0.001 0.001 0.001
Indexing accuracy Rotary axis second (60th min) 8 10 12 6 15
Indexing accuracy Inclined axis second (60th min) 20 15 15 15 30
Reproducibility Rotary axis second (60th min) ±2 ±2 ±2 ±2 ±2
Reproducibility Inclined axis second (60th min) ±3 ±2 ±2 ±2 ±2
Clamping torque Rotary shaft N・m 150 We are 4,312 4,312 98
Clamping torque Inclined shaft N・m 456 1,029 4,3128,624 196
Clamping pressure Rotating/tilting axis MPa 0.6 (air) 4.94.94.9 4.9
Product weight kg 200 680 1,450 9,000 420
Allowable load work mass kg 20 150 500320 30
Allowable Work Inertia kg・m² 0.042 1.7 22.5 40 0.15
Other motor specifications : Mitsubishi, Yaskawa, Siemens, etc.
Note : This type comes with a rotary scale.

Download Materials

PDF (EXTERIOR VIEW) 3D (EXTERIOR VIEW) DXF (EXTERIOR VIEW)
DDAT106-SSH-14 Download Contact Us Contact Us
DDAT306-1000-SSH-02 Download Contact Us Contact Us
DDAT506-07 Download Contact Us Contact Us
DDAT1006TD-01 Download Contact Us Contact Us
DDAT206-ECT-05 Download Contact Us Contact Us
close