Product
MDE
For electric discharge machining
Oil discharge
Ideal for EDM work on shafts and large diameters.
Can be used submerged in oil-based EDM fluids.
The only difference between MDE/MDHE and MDW/MDHW is the material.
Method
| Method | unit | MDE150R-49 | MDHE201R-03 | MDE400L-19 | MDE600R-10 | MDE800R-04 |
|---|---|---|---|---|---|---|
| Table diameter | mm | Φ150 | Φ200 | Φ400 | Φ630 | Φ800 |
| Vertical use center height | mm | 120 | 140 | 235 | 400 | 480 |
| Table height for horizontal use | mm | 175 | 175 | 310 | 295 | 379 |
| Table through-hole diameter | mm | Φ20 | Φ50 | Φ90 | Φ80 | Φ248 |
| TABLE T GROOVE WIDTH | mm | -. | -. | 14indecent 7 | 18indecent 7 | 18indecent 7 |
| Guide block width | mm | 14h7 | -. | 18h7 | 20h7 | 22h7 |
| Motor used | 800W | 800W | 3KW | 4.5KW | 7.5KW | |
| reduction ratio | 1/ 90 | 1/ 60 | 1/ 180 | 1/ 360 | 1/ 360 | |
| Max. speed | min-¹ | 2.5 | 11.1 | 5.5 | 2.7 | 5.5 |
| Motor speed | min-¹ | 225 | 666 | 1,000 | 1,000 | 2,000 |
| Minimum setting unit | times | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| derived precision | second (60th min) | 60( 10) | 14( 8) | 12( 8) | 12( 8) | 12( 8) |
| recall accuracy | second (60th min) | ± 3( 3) | ± 2( 2) | ± 2( 2) | ± 2( 2) | ±0.2 |
| Clamping torque | N・m | -. | -. | -. | -. | -. |
| Clamping pressure | MPa | -. | -. | -. | -. | -. |
| Allowable cutting torque (wheel strength) | N・m | 343 | 735 | 1,980 | 6,910 | 3,136 |
| Product weight | kg | 60 | 115 | 350 | 800 | 750 |
| Allowable loading workpiece mass (horizontal) | kg | 80 | 200 | 500 | 2,500 | 3,000 |
| Allowable loading workpiece mass (vertical) | kg | 60 | 100 | 350 | 800 | 950 |
| Allowable thrust load (when clamped) | N | -. | -. | -. | -. | -. |
| Moment allowable load (when clamped) | N・m | -. | -. | -. | -. | -. |
| Allowable load in rotation direction (when clamped) | N・m | -. | -. | -. | -. | -. |
| Allowable Work Inertia | kg・m² | 0.3 | 1.4 | 14.4 | 178.6 | 240 |
Other motor specifications: Mitsubishi, Yaskawa, Siemens, etc.
Note 1: Numbers in parentheses are precision type with rotary scale. In this case, the appearance will be slightly different. (T.I.R)
Note 1: Numbers in parentheses are precision type with rotary scale. In this case, the appearance will be slightly different. (T.I.R)
Download Materials
| PDF (EXTERIOR VIEW) | 3D (EXTERIOR VIEW) | DXF (EXTERIOR VIEW) | |
|---|---|---|---|
| MDE150R-49 | Download | Contact Us | Contact Us |
| MDHE201R-03 | Download | Contact Us | Contact Us |
| MDE400L-19 | Download | Contact Us | Contact Us |
| MDE600R-10 | Download | Contact Us | Contact Us |
| MDE800R-04 | Download | Contact Us | Contact Us |
