Product Information
MDH
Conventional
General-purpose
High precision high-rigidity High durability
Method
| Item | Unit | MDH233R-65 | MDH323R-09 | MDH453R-10 | MDH630R-05 |
|---|---|---|---|---|---|
| Table Diameter | mm | Φ230 | Φ325 | Φ450 | Φ630 |
| Center Height (Vertical Orientation) | mm | 185 | 235 | 255 | 400 |
| Table Height (Horizontal) | mm | 200 | 220 | 290 | 370 |
| Table Through-Hole Diameter | mm | Φ60 | Φ115 | Φ205 | Φ370 |
| Table T-slot width | mm | 12H8 | 14H7 | 14H7 | 18H8 |
| Guide Block Width | mm | 18:07 | 18:07 | 18:07 | 22h7 |
| Motor Used (FANUC*) | α is8/4000 | α is22/4000 | α is22/4000 | α is30/4000 | |
| Reduction Ratio | 1/60 | 1/60 | 1/60 | 1/180 | |
| Maximum RPM | min⁻¹ | 33.3 | 33.3 | 33.3 | 8.3 |
| Motor Speed | min⁻¹ | 2,000 | 2,000 | 2,000 | 1,500 |
| Minimum adjustment increment | Degree | 0.001 | 0.001 | 0.001 | 0.001 |
| Indexing Accuracy | seconds | 12(6) | 12(6) | 12(6) | 12(6) |
| Reproducibility | seconds | ±2(2) | ±2(2) | ±2(2) | ±2(2) |
| Clamping Torque | N·m | 284 | 2,303 | 4,674 | 3,700 |
| Clamping Pressure | MPa | 4.9 | 4.9 | 4.9 | 4.9 |
| Allowable Cutting Torque (Wheel Strength) | N·m | 735 | 1,117 | 2,200 | 6,910 |
| Product Weight | kg | 110 | 220 | 420 | 950 |
| Maximum Workpiece Load (Horizontal) | kg | 200 | 350 | 500 | 2,500 |
| Maximum Workpiece Weight (Vertical) | kg | 100 | 150 | 350 | 800 |
| Maximum Thrust Load (When Clamped) | N | 27,000 | 46,500 | 56,000 | 85,000 |
| Allowable Moment Load (When Clamped) | N·m | 1,150 | 4,900 | 6,400 | 8,600 |
| Permissible Load in the Direction of Rotation (When Clamped) | N·m | 284 | 2,303 | 4,675 | 3,700 |
| Allowable Work Inertia | kg·m² | 1.9 | 6.7 | 18.2 | 178.6 |
* Other motor specifications: Mitsubishi, Yaskawa, Siemens, etc.
Note 1: The numbers in parentheses () indicate precision models equipped with a rotary scale. Please note that the appearance differs slightly in these cases.
Note 2: Optional: Models with a built-in rotary joint are available.
Note 1: The numbers in parentheses () indicate precision models equipped with a rotary scale. Please note that the appearance differs slightly in these cases.
Note 2: Optional: Models with a built-in rotary joint are available.
Download Materials
| PDF (Exterior View) | 3D (Exterior View) | DXF (Exterior View) | PDF (Parts List) | |
|---|---|---|---|---|
| MDH233R-65 | Download | Contact Us | Contact Us | Download |
| MDH323R-09 | Download | Contact Us | Contact Us | |
| MDH453R-10 | Download | Contact Us | Contact Us | |
| MDH630R-05 | Download | Contact Us | Contact Us |
