Product Information
MDVi
Conventional
Motor Mounted on Top
Achieves ultra-high-speed rotation with the OTT warm wheel.
Ideal for scroll machining and high-speed, high-precision machining.
Method
| Item | Unit | MDVi216-14 | MDVi346-01 |
|---|---|---|---|
| Table Diameter | mm | Φ210 | Φ340 |
| Center Height (Vertical Orientation) | mm | 190 | 230 |
| Table Height (Horizontal) | mm | — | — |
| Table Through-Hole Diameter | mm | — | — |
| Table T-slot width | mm | — | — |
| Guide Block Width | mm | — | — |
| Motor Used (FANUC*) | α is22/4000 | α is22/4000 | |
| Reduction Ratio | 1/12 | 1/12 | |
| Maximum RPM | min⁻¹ | 166.7 | 150 |
| Motor Speed | min⁻¹ | 2,000 | 1,800 |
| Minimum adjustment increment | Degree | 0.001 | 0.001 |
| Indexing Accuracy | seconds | 20 | 20 |
| Reproducibility | seconds | ±2 | ±2 |
| Clamping Torque | N·m | — | — |
| Clamping Pressure | MPa | — | — |
| Allowable Cutting Torque (Wheel Strength) | N·m | 100 | 100 |
| Product Weight | kg | 200 | 320 |
| Maximum Workpiece Load (Horizontal) | kg | — | — |
| Maximum Workpiece Weight (Vertical) | kg | 100 | 120 |
| Maximum Thrust Load (When Clamped) | N | — | — |
| Allowable Moment Load (When Clamped) | N·m | — | — |
| Permissible Load in the Direction of Rotation (When Clamped) | N·m | — | — |
| Allowable Work Inertia | kg·m² | 1.6 | 5.2 |
* Other motor specifications: Mitsubishi, Yaskawa, Siemens, etc.
Note 1: Models with an “i” in the model number are equipped with a rotary scale. (T.I.R.)
Note 2: Optional: Models with a built-in rotary joint are available.
Note 1: Models with an “i” in the model number are equipped with a rotary scale. (T.I.R.)
Note 2: Optional: Models with a built-in rotary joint are available.
Download Materials
| PDF (Exterior View) | 3D (Exterior View) | DXF (Exterior View) | |
|---|---|---|---|
| MDVi216-14 | Download | Contact Us | Contact Us |
| MDVi346-01 | Download | Contact Us | Contact Us |
