Product Information

トップ > 製品情報 > PSC,PGC

PSC, PGC

Power Swing
Service Connection

Pull-in-Center Compensating Type.
The workpiece is firmly pulled against the chuck face and gripped by the claw swing mechanism.

Method

Unit PSC-6 PSC-8 PSC-10 PSC-12 PSC-15 PSC-18 PSC-21
Comprehension KN 64.7 87.3 105.8 105.8 161.7 161.7 161.7
Drawing Power KN 21.6 28.4 35.3 35.3 53.9 53.9 53.9
Maximum RPM min-1 3,000 2,800 2,500 2,000 1,600 1,200 900
Jaw stroke mm Φ7.9 Φ9.5 Φ12.7 Φ12.7 Φ15.8 Φ15.8 Φ15.8
Shifter stroke mm 11.3 13.3 17.5 17.5 22.3 22.3 22.3
Grip Range: Outer Diameter mm 12.7–120 16–152 50–203 63–241 76–317 89–394 162–470
Grip Range: Inner Diameter mm 70–152 76–203 85–235 127–305 165–381 241–457 317–533
Mass kg 18 27 45 67.5 84.5 120 180
GD2 N·m² 1.47 4.70 12.05 23.72 83.20 148.67 245.00
Compatible Cylinder RNKP105-15-02 RNKP120-25-07 RNKP120-25-07 RNKP120-25-07 RNKP150-35-01 RNKP150-35-01 RNKP150-35-01

Unit PGC-6 PGC-8 PGC-10 PGC-12 PGC-15 PGC-18 PGC-21
Comprehension KN 64.7 87.3 105.8 105.8 161.7 161.7 161.7
Drawing Power KN 21.6 28.4 35.3 35.3 53.9 53.9 53.9
Maximum RPM min-1 3,000 2,800 2,500 2,000 1,600 1,200 900
Jaw stroke mm Φ7.9 Φ9.5 Φ12.7 Φ12.7 Φ15.8 Φ15.8 Φ15.8
Shifter stroke mm 11.3 13.3 17.5 17.5 22.3 22.3 22.3
Grip Range: Outer Diameter mm 12.7–120 16–152 50–203 63–241 76–317 89–394 162–470
Grip Range: Inner Diameter mm 70–152 76–203 85–235 127–305 165–381 241–457 317–533
Mass kg 18 27 45 67.5 84.5 120 180
GD2 N·m² 1.47 4.70 12.05 23.72 83.20 148.67 245.00
Compatible Cylinder 2R105-15-02 2R105-15-02 2R120-21-05 2R120-21-05 2R150-21-25 2R150-21-25 2R150-21-25
close