Exhibition Announcement: MEX Kanazawa 2026, May 14–16

We will be exhibiting at MEX Kanazawa 2026, held at the Ishikawa Prefectural Industrial Exhibition Hall,
under the theme “24 Hours Straight.”

Event Overview

[Organizer] Ishikawa Prefecture Ironworks, Machinery, and Electrical Association (General Incorporated Association)
[Dates] May 14 (Thu) – 16 (Sat), 2026 (3 days)
【Opening Hours】10:00 AM – 5:00 PM *Closes at 4:00 PM on the final day, Saturday, May 16
【Admission】Free
【Venue】Ishikawa Prefectural Industrial Exhibition Hall, Halls 1, 3, and 4 >>Access
【MATSUMOTO Booth Number】Hall 4, 4-067
Click here for advance visitor registration
MEX Kanazawa Advance Visitor Registration

Keep an eye on this this year

We will be demonstrating various peripheral devices that enable automated setup changes.

■Peripheral Equipment Specialized for Turning Automation
Chuck jaw exchange
・Setup changes without the need to replace the chuck body using an 8-inch hybrid chuck (standard chuck + collet)
・Simultaneous chuck jaw replacement via plate exchange using AJC
・CAPTO tool exchange using a nut runner

Takamatsu Machinery Industries Co., Ltd. (Building 3 [3-019]) Collaborative Exhibition with “AT-1”
・Introduction to the 8-inch Hybrid Chuck (Standard Chuck + Collet)

■Automation of Grinding Operations
JTEKT Corporation (Building 4 [4-066]) Collaborative Exhibition with “G1P25G”
・Workpiece transport and fixture attachment/detachment using the new Smart Terrace Adv product

In addition to our automation-ready lineup, we will showcase peripheral machine tools that contribute to achieving the best possible results.
This content addresses the challenges of high-mix, low-volume production, making it a must-see for everyone involved in manufacturing!
We understand you are very busy, but we sincerely hope you will take this opportunity to visit MATSUMOTO booth.
We look forward to welcoming you.

Exhibition information is now available ⇒ MEX Kanazawa: Kanazawa Machinery Industry Trade Fair

Workshop Overview

We’ll be holding a workshop again this year! We hope you’ll join us.
[Date and Time] Friday, May 15, 2026, 3:40 PM – 4:40 PM
[Venue] Ishikawa Prefectural Industrial Exhibition Hall, Building 4 – Special Workshop Venue
[Topic] Automation Starting with Single-Item Flow
[Instructor] Koichi Imai, Section Chief, Hokuriku Sales, Sales Division, Head Office Sales Department
*Please register as soon as possible here.
Workshop

Participate in the Special Student Program

We’ll be giving a company presentation at our booth. There are also special perks available exclusively to those who attend the presentation.
Be sure to pre-register and stop by our booth! ♪
Click here to pre-register for the event
MEX Kanazawa Special Event

"Automation, Around the Clock" solves the problems of high-mix low-volume production

High-mix low-volume production requires a lot of time for setup, and manpower shortage, machine utilization rate, and productivity have become issues.
Matsumoto Machine proposes robot automation as a means to solve such problems.
Automation of even a single lot is a matter of course. That is "Automation, Around the Clock".

Lineup of automated support that realizes Automation, Around the Clock

■Automatic set up exchange Robot System
・NEW!"Smart Terrace Adv-S10SF"　　　　　・"Smart Terrace AIO-S7SF"　　　　　　　　　・"Smart Terrace AIO-M12SF"
　　

Automatic jaw change chuck
・"HQJC"　　　　　　　・"AJC"　　　　　　　　　・"Hybrid Chuck"

■Measuring robot hand for cylindrical grinders ■Out-of-machine workpiece measuring device ■CAPTO Tool exchange ■Automatic dog exchange device for cylindrical grinders

Helping You Achieve the Best Results! A Product Lineup That Boosts On-Site Performance

■NC Rotary Table for MC
・"CX253R (Integrated Chuck and Cylinder)"

■NC Rotary Table for Electrical Discharge Machining
・MTW86 (FOR WIRE EDM) ・MDHW100L (1-AXIS, FOR WATER-BASED EDM) ・SAT100 (2-AXIS, FOR BOTH WATER-BASED AND OIL-BASED EDM)
　　　　　　　　　　　　　　　　　