NEW Model Development
speed spin table for wire discharge grinding
MTW86 | MATSUMOTO MACHINE CO.,LTD.(mmkchuck.com)
Φ25 through hole modelWith 2μm repeatability chuck
HOWEVER, THE CHUCK IS NOT MADE BY MMK.
Through hole φ25 model photo
This machine is designed for small-diameter external machining, external machining after quenching, and external shaping of diamond grinding wheels on EDM machines.
The machine is designed for small diameters, with a maximum speed of 1,500 rpm and an axial run-out of less than 2 μm during rotation.
Optional pneumatic rotary joints are available for attachment.
For long workpieces with through holes ø25 model.
Available for direct control of the machine and for control of non-machine load axes with a dedicated separate controller.
Allowable load 5kg Product weight 20kg
Mounted on wire-cutting machines
1,500 continuous revolutions
Microfabrication down to the micron is possible
2 μm run-out of the axial centre
Grinding of small diameter workpieces
Click here for more information
Click here to contact us about our products